TABLE OF CONTENTS

• 1. Inverter Not Working / Completely Dead
  • Possible Reasons
  • Troubleshooting Steps
• 2. Physical Damage
  • Common Types of Damage
  • Important Notes
• 3. USB / Type-C Ports Not Working
  • Troubleshooting Steps
• 4. Frequent Shutdown / Auto Cut-Off
  • Troubleshooting Steps
• 5. Overheating Issue
  • Troubleshooting Steps
• 6. No AC Output
  • Troubleshooting Steps
• 7. Compatibility Issue
  • Troubleshooting Steps
• 8. Other Issues
• Still Facing Issues?

1. Inverter Not Working / Completely Dead

Possible Reasons

• No power supply from car socket
• Loose connection
• Blown fuse
• Internal hardware issue

Troubleshooting Steps

1. Ensure the inverter is connected properly to the car socket or battery.
2. Start the vehicle ignition before testing.
3. Check whether the power LED indicator turns ON.
4. Test the inverter in another car socket if available.
5. Disconnect all connected devices and restart the inverter.
6. Verify whether the fuse is damaged if fuse replacement is supported.

2. Physical Damage

Common Types of Damage

• Broken body
• Burn marks
• Damaged AC socket
• Loose USB/Type-C ports
• Broken cables or connectors

Important Notes

Physical or accidental damage will not be covered under warranty.

3. USB / Type-C Ports Not Working

Troubleshooting Steps

1. Use another compatible charging cable.
2. Test charging with another smartphone or device.
3. Disconnect and reconnect the cable properly.
4. Clean the USB/Type-C ports carefully.

4. Frequent Shutdown / Auto Cut-Off

Troubleshooting Steps

1. Disconnect high-power appliances and test again.
2. Ensure the connected device power rating is within inverter capacity.
3. Allow the inverter to cool down before reuse.
4. Check whether ventilation openings are blocked.

5. Overheating Issue

Troubleshooting Steps

1. Disconnect the inverter and allow it to cool down.
2. Ensure proper airflow around the inverter.
3. Avoid covering ventilation areas.
4. Test the inverter with low-power devices only.

6. No AC Output

Troubleshooting Steps

1. Test the AC output using another compatible appliance.
2. Ensure appliance wattage is within supported limits.
3. Restart the inverter and reconnect the appliance.

7. Compatibility Issue

Troubleshooting Steps

1. Verify whether the connected device/appliance is supported.
2. Use compatible charging cables and adapters.
3. Test the inverter with another device.

8. Other Issues

If your issue is not listed above:

• Restart the inverter.
• Verify all cable connections.
• Test with another compatible device or appliance.

Still Facing Issues?

If the issue persists after performing all troubleshooting steps, please Click here raise a support request.

Thank you for choosing our products.