Portronics Magma Go — Complete Guide

TABLE OF CONTENTS

• Product Overview
• Quick Reference
• What's in the Box
• Parts & Controls
• Before You Begin
• Filling the Water Tank
• Selecting a Spray Mode
• Controlling the Ambient Light
• Using Magma Go
• Cotton Swab Care
• Cleaning & Maintenance
• Safety & Care
• Still stuck?

Product Overview

The Portronics Magma Go is a compact, Type-C powered car fragrance diffuser designed for use in cars and indoor spaces. It uses ultrasonic atomization to disperse water-based fragrance liquid and includes a rainbow-gradient ambient light.

Quick Reference

What's in the Box

Parts & Controls

Before You Begin

1. Place the diffuser upright on a stable surface.
2. Use water-based fragrance liquid only.
3. Do not use oil-based fragrances or liquids.
4. Make sure the cotton swab is inserted fully into the bottle.
5. Keep the diffuser upright during operation.
6. Connect it to a compatible 5V/1A USB Type-C power source.

The diffuser requires a power connection during operation; it is not a cordless device.

Filling the Water Tank

1. Open the water tank.
2. Add water-based fragrance liquid.
3. Insert the cotton swab fully into the bottle.
4. Close the unit securely.
5. Connect the Type-C power cable to the diffuser and a compatible power source.

Do not use oil-based fragrance liquids. Do not operate the diffuser without liquid.

Selecting a Spray Mode

Short-press the Power Button to cycle through the spray settings.

There are four active spray modes. The fifth button state switches the spray function OFF.

Controlling the Ambient Light

• Press and hold the Power Button to turn the rainbow-gradient ambient light ON or OFF.
• The light control operates separately from the spray-mode selection.

Using Magma Go

1. Fill the tank with a water-based fragrance liquid.
2. Insert the cotton swab fully into the bottle.
3. Close the unit securely.
4. Connect the Type-C cable to a compatible 5V/1A power source.
5. Short-press the Power Button to select the desired spray mode.
6. Long-press the Power Button to switch the rainbow-gradient ambient light ON or OFF.
7. Keep the unit upright while it is operating.

Cotton Swab Care

• Clean or replace the cotton swab periodically.
• Weak fragrance output may indicate that the cotton swab needs cleaning or replacement.
• Make sure the cotton swab is fully inserted into the bottle before operating the diffuser.

Cleaning & Maintenance

1. Disconnect the Type-C power cable before cleaning.
2. Empty the tank before cleaning it.
3. Clean or replace the cotton swab periodically.
4. Wipe the exterior with a soft, dry cloth.
5. Allow the unit to dry before reconnecting power.

Do not clean the unit while it is connected to power. Do not use oil-based liquids.

Safety & Care

• Use water-based fragrance liquids only.
• Do not use oil-based fragrances or liquids.
• Do not tilt or invert the diffuser during operation.
• Do not operate it without liquid.
• Keep the diffuser out of reach of children.
• Clean or replace the cotton swab periodically.
• Disconnect power before cleaning.
• Keep the Type-C port and cable connection dry.
• Place the diffuser upright on a stable surface.
• Do not block the spray outlet.

Still stuck?

If the issue persists after performing all troubleshooting steps, please raise a support request.

Our support team will assist you further.

Support

• Visit: www.portronics.com
• Support Portal: support.portronics.com