TABLE OF CONTENTS

• 1. Product Overview
• 2. Package Contents
• Section A: How to Setup the Device
  • Step 1: Unfold the Handle
  • Step 2: Install the Nozzle
  • Step 3: Connect Water Supply
• Section B: How to Start & Use
  • Step 1: Prime the Water Flow
  • Step 2: Power ON
  • Step 3: Select Gear Mode
  • Step 4: Start Cleaning
• Section C: Spray Modes
• Section D: How to Use Detergent
  • Step 1: Prepare
  • Step 2: Install Bottle
  • Step 3: Apply Detergent
  • Step 4: Remove & Rinse
• Section E: Charging Instructions
  • Step 1: Connect Charger
  • Step 2: Charging Status
  • Important Notes:
• Section F: Troubleshooting Guide
  • Issue 1: Device Not Starting
  • Issue 2: No Water Flow
  • Issue 3: Low Pressure
  • Issue 4: Water Leakage
• Section G: Maintenance
  • Cleaning the Filter
  • General Maintenance Tips
• Section H: Safety Guidelines
• Still Facing Issues?

1. Product Overview

Model: Portronics Torque X

Type: Foldable & Cordless Pressure Washer Gun

The Portronics Torque X is designed for quick and effective cleaning of everyday surfaces using high-pressure water. It is ideal for cars, bikes, balconies, windows, outdoor furniture, garden tools, and bathroom surfaces. Its foldable design, rechargeable battery, and multiple spray modes make it highly portable and easy to use

2. Package Contents

• Torque X Unit
• Type-C Charging Cable
• 5-in-1 Rotating Nozzle
• Water Bottle Adapter
• Detergent Bottle (200 ml)
• Self-Priming Hose (5 Meter)
• Hose Clamp 
• Filter Screens (2)
• User Manual

Section A: How to Setup the Device

Step 1: Unfold the Handle

• Always unfold before use
• Ensure you hear a click for proper locking
• Fold only when device is OFF

Step 2: Install the Nozzle

• Align nozzle clip with outlet groove
• Push fully inside
• Rotate clockwise until locked
• Ensure marking alignment for proper fit

Step 3: Connect Water Supply

Method A: Bucket / Tank

• Connect self-priming hose
• Place filter fully inside water
• Use clamp if hose floats

Method B: Bottle Mode

• Attach adapter to bottle
• Use 2L bottle (recommended)
• Fill with clean water
• Provides ~50 seconds usage

Section B: How to Start & Use

Step 1: Prime the Water Flow

• Point nozzle in safe direction
• Press trigger
• Wait until steady water flow (no air)

Step 2: Power ON

• Press and hold power button (1 sec) → ON
• Press and hold (3 sec) → Start cleaning

Step 3: Select Gear Mode

• Gear 1: Low pressure (light cleaning)
• Gear 2: Medium pressure
• Gear 3: High pressure (tough dirt)

Short press to switch modes (shown on display)

Step 4: Start Cleaning

• Press trigger to spray
• Release trigger to stop

Section C: Spray Modes

• 0°: Strong jet (hard dirt)
• 15°: Vehicle cleaning
• 25°: General cleaning
• 40°: Gentle rinse
• Shower: Plants / soft cleaning

Section D: How to Use Detergent

Step 1: Prepare

• Remove nozzle & hose
• Fill detergent bottle (200 ml)

Step 2: Install Bottle

• Hold vertically
• Insert and rotate 90° to lock
• Do NOT install horizontally (leak risk)

Step 3: Apply Detergent

• Spray evenly on surface

Step 4: Remove & Rinse

• Rotate bottle 90° to remove
• Reinstall nozzle
• Rinse surface with clean water

Section E: Charging Instructions

Step 1: Connect Charger

• Use Type-C cable
• Use 5V/2A or higher adapter

Step 2: Charging Status

• Lightning icon blinks while charging
• Display shows 100% when fully charged

Important Notes:

• Adapter not included
• Do not charge in wet conditions
• Cannot use while charging
• Low battery shows E3 error

Section F: Troubleshooting Guide

Issue 1: Device Not Starting

Checks:

• Battery low → Recharge
• Check charging connection

Issue 2: No Water Flow

Checks:

• Filter/nozzle blocked → Clean
• Hose not submerged → Fix
• Air inside → Re-prime

Issue 3: Low Pressure

Checks:

• Nozzle blocked → Clean
• Check the filter as well
• Switch to gear 3.
• Battery low

Issue 4: Water Leakage

Checks:

• Loose connection → Tighten properly

Section G: Maintenance

Cleaning the Filter

• Remove filter from hose
• Wash under clean water
• Remove dirt/debris
• Reinstall properly

General Maintenance Tips

• Clean filter regularly
• Flush with clean water after use
• Dry before storage
• Recharge every 3–5 months

Section H: Safety Guidelines

• Do not disassemble or modify
• Keep away from children
• Do not spray on people/animals
• Avoid use near fire or electrical appliances
• Avoid splashing water on main unit
• Use original accessories only

Still Facing Issues?

• If the issue persists after performing all troubleshooting steps, please Click here raise a support request.

           Our support team will assist you further.