TABLE OF CONTENTS

• Section A: How to Connect via 2.4 GHz USB Receiver
  • Step 1: Power ON the Mouse
  • Step 2: Insert the USB Receiver
  • Step 3: Confirmation
• Section B: How to Connect via Bluetooth
  • Step 1: Power ON the Mouse
  • Step 2: Select Bluetooth Mode
  • Step 3: Activate Pairing Mode
  • Step 4: Enable Bluetooth on Your Device
  • Step 5: Connection Confirmation

Section A: How to Connect via 2.4 GHz USB Receiver

Step 1: Power ON the Mouse

• Switch the mouse to 2.4G mode.
• Ensure the mouse is sufficiently charged.

Step 2: Insert the USB Receiver

• Insert the USB receiver into your laptop/PC.
• The mouse will connect automatically (plug & play).

Step 3: Confirmation

• Move the mouse to verify cursor movement.
• If not working, try another USB port.

Section B: How to Connect via Bluetooth

Step 1: Power ON the Mouse

• Switch the mouse to BT mode.

Step 2: Select Bluetooth Mode

• Press the circular button to switch between modes:
  • Toad 7 → Green Indicator
  • Toad 7 Plus → Blue Indicator

Step 3: Activate Pairing Mode

• Press and hold the Bluetooth pairing button for 2–5 seconds.
• The LED indicator will start blinking, indicating pairing mode.

Step 4: Enable Bluetooth on Your Device

For Windows:

• Go to Settings → Bluetooth & Devices
• Turn Bluetooth ON
• Click Add Device → Bluetooth
• Select Portronics Toad 7 / Toad 7 Plus
• Click Connect

For macOS:

• Open System Settings → Bluetooth
• Turn Bluetooth ON
• Select Portronics Toad 7 / Toad 7 Plus
• Click Connect

Step 5: Connection Confirmation

• Once connected, the LED indicator becomes stable.
• The cursor will respond to movement.

Still Facing Issues?

If the issue persists after performing all troubleshooting steps, please Click here raise a support request.

Our support team will assist you further.