How to reset Bubble 3.0 ?

Troubleshooting Guide: How to Reset the Bubble 3.0 Keyboard

If the Bubble 3.0 keyboard is not responding, facing connectivity issues, or behaving unexpectedly, performing a reset can help restore normal functionality. Follow the steps below to reset the keyboard properly.

Step 1: Switch to 2.4 GHz Mode

Locate the mode switch on the keyboard and slide it to 2.4 GHz mode.
This prepares the keyboard for the reset process.

Step 2: Perform the Reset Command

Press and hold the following keys simultaneously for 3 seconds:

ESC + Q

This key combination will initiate the keyboard reset.

Step 3: Reconnect the USB Receiver

After the reset:

1. Insert the USB receiver (dongle) into the USB port of your laptop or desktop.

2. Wait a few seconds for the system to detect the device.

3. The keyboard should automatically reconnect and begin working normally.

Additional Recommendations

If the keyboard still does not function after resetting:

• Remove and reinsert the USB receiver.

• Try connecting to a different USB port.

• Ensure the keyboard has sufficient battery charge.

• Restart your computer and reconnect the keyboard.

Once these steps are completed, the Bubble 3.0 keyboard should resume normal operation.