How to connect Hydra 10 using wire?

Connecting via Wired Mode

Step 1: Switch the Toggle Mode
Slide the toggle switch (located on the back side of the keyboard) to Wired Mode.

Step 2: Connect the Cable
Use the USB cable provided with the keyboard to connect the keyboard to your device.

The keyboard will automatically establish a wired connection.

Step 3: Confirmation
Once connected, the keyboard will start responding normally while typing.

Troubleshooting (Wired Mode)

Issue 1: Keyboard Not Detected in Wired Mode

Recommended Checks:

• Ensure the toggle switch is set to Wired Mode.

• Check that the USB cable is properly connected to both the keyboard and the device.

• Try connecting the cable to a different USB port on your laptop or desktop.

• Restart your computer or laptop and reconnect the keyboard.

Issue 2: Keyboard Connected but Keys Not Responding

Recommended Checks:

• Disconnect and reconnect the USB cable.

• Try using the keyboard on another USB port.

• Restart the device and test the keyboard again.

Issue 3: Intermittent Connection in Wired Mode

Recommended Checks:

• Ensure the USB cable is not loose or damaged.

• Avoid using USB hubs or extension adapters; connect the keyboard directly to the device.

• Test with another USB port on the device.

• Restart the device and reconnect the keyboard.