TABLE OF CONTENTS

• 1. Product Overview
• Section A: Connection via 2.4 GHz USB Receiver
  • Step 1: Power ON the mouse.
  • Step 2: Insert USB Receiver
  • Step 3: Confirmation
• Section B: Connection via Bluetooth
  • Step 1: Power ON the Mouse
  • Step 2: Activate Pairing Mode
  • Step 3: Enable Bluetooth on Device
  • Step 4: Connection Confirmation
• Section C: Multi-Device Switching
• Section D: Charging Instructions
• Section E: Troubleshooting Guide
  • Issue 1: Mouse Not Connecting (Bluetooth)
  • Issue 2: Mouse Not Working (2.4 GHz Mode)
  • Issue 3: Frequent Disconnection
  • Issue 4: Cursor Lag or Delay
  • Issue 5: Mouse Not Charging
• Important Usage & Care Instructions
• Still Facing Issues?

1. Product Overview

Model: Toad 6
Connectivity: Bluetooth 5.3 & 2.4 GHz Wireless
Power Source: Rechargeable Battery (Type-C Charging)
Key Features:

• Multi-device pairing
• Silent click operation
• Flat ergonomic design
• 1200 DPI optical sensor for smooth tracking 

Section A: Connection via 2.4 GHz USB Receiver

Step 1: Power ON the mouse.

• Switch the mouse to 2.4G mode.
• Ensure the device is sufficiently charged.

Step 2: Insert USB Receiver

• Plug the USB receiver into your laptop/PC.
• The mouse will connect automatically (plug & play).

Step 3: Confirmation

• Move the mouse to verify cursor movement.
• If not working, try a different USB port.

Section B: Connection via Bluetooth

Step 1: Power ON the Mouse

• Switch the mouse to Bluetooth (BT) mode.

Step 2: Activate Pairing Mode

• Press and hold the mode/pairing button for 5–7 seconds.
• LED indicator will blink rapidly (pairing mode).

Step 3: Enable Bluetooth on Device

For Windows:

• Go to Settings → Bluetooth & Devices
• Turn Bluetooth ON
• Click Add Device → Bluetooth
• Select Portronics Toad 6 → Connect

For macOS:

• Open System Settings → Bluetooth
• Turn Bluetooth ON
• Select Portronics Toad 6 → Connect

Step 4: Connection Confirmation

• Cursor movement confirms successful connection.
• Mouse is now ready to use.

Section C: Multi-Device Switching

• Toad 6 supports multiple device pairing. ()
• Use the mode button to switch between connected devices.
• Ensure the correct device mode is selected before use.

Section D: Charging Instructions

• Use the Type-C cable provided.
• Connect to a power source to recharge.
• Avoid using the mouse while charging for optimal battery health.

Section E: Troubleshooting Guide

Issue 1: Mouse Not Connecting (Bluetooth)

• Ensure pairing mode is active (blinking LED).
• Restart Bluetooth on your device.
• Turn mouse OFF and ON again.
• Ensure sufficient battery charge.

Issue 2: Mouse Not Working (2.4 GHz Mode)

• Reinsert the USB receiver.
• Try a different USB port.
• Restart your system.

Issue 3: Frequent Disconnection

• Maintain usage within 5–10 meters range.
• Fully charge the mouse.
• Remove and reconnect the device.

Issue 4: Cursor Lag or Delay

• Keep the mouse closer to the device.
• Avoid reflective/glass surfaces.
• Close high-resource applications.
• Check battery level.

Issue 5: Mouse Not Charging

• Ensure the Type-C cable is properly connected.
• Try a different charging adapter or port.

Important Usage & Care Instructions

• Do not expose the mouse to moisture or dust.
• Avoid dropping or applying excessive pressure.
• Store in a cool and dry environment.
• Turn OFF the mouse when not in use for extended periods.

Still Facing Issues?

If the issue persists after performing all troubleshooting steps, please Click here raise a support request.

Our support team will assist you further.